Safari Roof Rack - Mercedes Sprinter 907-VS30
Estimate Shipping
Safari Roof Rack - Mercedes Sprinter 907-VS30
Safari Roof Racks for serious touring.
About the Safari Roof Rack
The Weldbeat Safari Roof Rack is built for serious touring. Designed specifically for the Mercedes Sprinter 907, it delivers a lightweight yet extremely strong platform for mounting accessories, solar panels, storage boxes, recovery gear, and more.
Constructed from TIG-welded aluminium, the rack features an integrated T-slot modular system, so you can configure your layout exactly how you need it — awnings, light bars, Maxtrax, or custom mounts all bolt straight on.
Engineered to sit cleanly with the Sprinter’s body lines, it provides a low-profile, aerodynamic solution without compromising strength or usable space.
Made in Australia
All our products are proudly made in Australia, ensuring premium quality and durability.
Installation
Recommended fitment is to OEM roof rails.
Jayco Sprinter owners: the factory Fiamma awning and brackets interfere with fitment and must be removed. An alternative Fiamma awning setup is required — see the Accessories tab for our recommendation.
Carrier Specification
- TIG-welded aluminium construction
- T-slot modular channel system for attaching various decking members
- Lightweight design
- Powder-coated textured black finish
- Online installation manual included
- Recommended Fiamma F45s 450 (Long Wheel Base) or F45s 350 (Medium Wheel Base)
- Ships in 3 boxes
Step 1 — Choose the right rack for your Sprinter
Your Safari Roof Rack needs to match your van’s roof height and wheelbase:
- Fits both Standard/Short Roof (H1) and High Roof (H2) Sprinter models
- High Roof is available in Medium Wheelbase (L1) and Long Wheelbase (L2)
- Short Roof is only available in Medium Wheelbase (L1)
Click to enlarge
Step 2 — Choose your mounting method
OEM Mercedes roof rails (recommended): bolts on without needing interior access. If you’re also planning a side ladder or pole system, having the OEM rails in place makes that install easier down the track.
Direct-to-roof brackets: mounts using the existing roof holes for brackets. Best done before fit-out, since it needs interior access to secure the brackets. If interior access isn’t available, nut serts can be used instead — just make sure they’re properly sealed to prevent leaks.
Click to enlarge
Step 3 — Configure your floor decking
The platform’s two T-slot rails let you lay out decking exactly how you need it. Dimensions vary by model:
| Model | A (H1L1) | A (H2L1) | A (H2L2) | B (width) |
|---|---|---|---|---|
| Sprinter High Roof | — | 3130mm | 4165mm | 1370mm |
| Sprinter Short Roof | 3543mm | — | — | 1548mm |
Decking is fully modular. Combine the Main Decking Plate with End, Side and Edge Connector plates to leave clean gaps around roof vents, and add Solar Brackets wherever you need them — see the Accessories tab for the full decking range.
Awnings
The rack is compatible with Fiamma and Thule awning systems.
- Long Wheelbase vans: we recommend the Fiamma F45s 450
- Medium Wheelbase vans: we recommend the Fiamma F45s 350
Shop Fiamma F45s 450 Awning Shop Fiamma F45s 350 Awning
Light bars
Mount a light bar using clamps designed for 40mm-diameter tubing — Stedi clamps are a good fit. Our STEDI Vice Tube Clamps also come in larger sizes if you're mounting to a thicker bar.
Shop Stedi Light Bar Shop Stedi Tube Clamps (35-40mm)
Roof Decking Range
The Main Decking Plate gives you a spacious, stable platform for walking, sitting, or securely mounting your gear. Pair it with our connector decking plates — purpose-built to sit around roof vents — and you can create a clean gap wherever you need one, without cutting or compromising the platform.
The full range:
- End Decking Plate
- Edge Side Connector Decking Plate
- Side Connector Decking Plate
- Main Decking Plate
- Solar Brackets
Click to enlarge
The image above shows an example decking configuration.
End Decking Plate Edge Side Connector Decking Plate Side Connector Decking Plate Main Decking Plate Solar Panel Brackets Pair
Safari Roof Rack - Mercedes Sprinter 907-VS30
Safari Roof Racks for serious touring.
About the Safari Roof Rack
The Weldbeat Safari Roof Rack is built for serious touring. Designed specifically for the Mercedes Sprinter 907, it delivers a lightweight yet extremely strong platform for mounting accessories, solar panels, storage boxes, recovery gear, and more.
Constructed from TIG-welded aluminium, the rack features an integrated T-slot modular system, so you can configure your layout exactly how you need it — awnings, light bars, Maxtrax, or custom mounts all bolt straight on.
Engineered to sit cleanly with the Sprinter’s body lines, it provides a low-profile, aerodynamic solution without compromising strength or usable space.
Made in Australia
All our products are proudly made in Australia, ensuring premium quality and durability.
Installation
Recommended fitment is to OEM roof rails.
Jayco Sprinter owners: the factory Fiamma awning and brackets interfere with fitment and must be removed. An alternative Fiamma awning setup is required — see the Accessories tab for our recommendation.
Carrier Specification
- TIG-welded aluminium construction
- T-slot modular channel system for attaching various decking members
- Lightweight design
- Powder-coated textured black finish
- Online installation manual included
- Recommended Fiamma F45s 450 (Long Wheel Base) or F45s 350 (Medium Wheel Base)
- Ships in 3 boxes
Step 1 — Choose the right rack for your Sprinter
Your Safari Roof Rack needs to match your van’s roof height and wheelbase:
- Fits both Standard/Short Roof (H1) and High Roof (H2) Sprinter models
- High Roof is available in Medium Wheelbase (L1) and Long Wheelbase (L2)
- Short Roof is only available in Medium Wheelbase (L1)
Click to enlarge
Step 2 — Choose your mounting method
OEM Mercedes roof rails (recommended): bolts on without needing interior access. If you’re also planning a side ladder or pole system, having the OEM rails in place makes that install easier down the track.
Direct-to-roof brackets: mounts using the existing roof holes for brackets. Best done before fit-out, since it needs interior access to secure the brackets. If interior access isn’t available, nut serts can be used instead — just make sure they’re properly sealed to prevent leaks.
Click to enlarge
Step 3 — Configure your floor decking
The platform’s two T-slot rails let you lay out decking exactly how you need it. Dimensions vary by model:
| Model | A (H1L1) | A (H2L1) | A (H2L2) | B (width) |
|---|---|---|---|---|
| Sprinter High Roof | — | 3130mm | 4165mm | 1370mm |
| Sprinter Short Roof | 3543mm | — | — | 1548mm |
Decking is fully modular. Combine the Main Decking Plate with End, Side and Edge Connector plates to leave clean gaps around roof vents, and add Solar Brackets wherever you need them — see the Accessories tab for the full decking range.
Awnings
The rack is compatible with Fiamma and Thule awning systems.
- Long Wheelbase vans: we recommend the Fiamma F45s 450
- Medium Wheelbase vans: we recommend the Fiamma F45s 350
Shop Fiamma F45s 450 Awning Shop Fiamma F45s 350 Awning
Light bars
Mount a light bar using clamps designed for 40mm-diameter tubing — Stedi clamps are a good fit. Our STEDI Vice Tube Clamps also come in larger sizes if you're mounting to a thicker bar.
Shop Stedi Light Bar Shop Stedi Tube Clamps (35-40mm)
Roof Decking Range
The Main Decking Plate gives you a spacious, stable platform for walking, sitting, or securely mounting your gear. Pair it with our connector decking plates — purpose-built to sit around roof vents — and you can create a clean gap wherever you need one, without cutting or compromising the platform.
The full range:
- End Decking Plate
- Edge Side Connector Decking Plate
- Side Connector Decking Plate
- Main Decking Plate
- Solar Brackets
Click to enlarge
The image above shows an example decking configuration.
End Decking Plate Edge Side Connector Decking Plate Side Connector Decking Plate Main Decking Plate Solar Panel Brackets Pair
Safari Roof Rack - Mercedes Sprinter 907-VS30
Safari Roof Racks for serious touring.
About the Safari Roof Rack
The Weldbeat Safari Roof Rack is built for serious touring. Designed specifically for the Mercedes Sprinter 907, it delivers a lightweight yet extremely strong platform for mounting accessories, solar panels, storage boxes, recovery gear, and more.
Constructed from TIG-welded aluminium, the rack features an integrated T-slot modular system, so you can configure your layout exactly how you need it — awnings, light bars, Maxtrax, or custom mounts all bolt straight on.
Engineered to sit cleanly with the Sprinter’s body lines, it provides a low-profile, aerodynamic solution without compromising strength or usable space.
Made in Australia
All our products are proudly made in Australia, ensuring premium quality and durability.
Installation
Recommended fitment is to OEM roof rails.
Jayco Sprinter owners: the factory Fiamma awning and brackets interfere with fitment and must be removed. An alternative Fiamma awning setup is required — see the Accessories tab for our recommendation.
Carrier Specification
- TIG-welded aluminium construction
- T-slot modular channel system for attaching various decking members
- Lightweight design
- Powder-coated textured black finish
- Online installation manual included
- Recommended Fiamma F45s 450 (Long Wheel Base) or F45s 350 (Medium Wheel Base)
- Ships in 3 boxes
Step 1 — Choose the right rack for your Sprinter
Your Safari Roof Rack needs to match your van’s roof height and wheelbase:
- Fits both Standard/Short Roof (H1) and High Roof (H2) Sprinter models
- High Roof is available in Medium Wheelbase (L1) and Long Wheelbase (L2)
- Short Roof is only available in Medium Wheelbase (L1)
Click to enlarge
Step 2 — Choose your mounting method
OEM Mercedes roof rails (recommended): bolts on without needing interior access. If you’re also planning a side ladder or pole system, having the OEM rails in place makes that install easier down the track.
Direct-to-roof brackets: mounts using the existing roof holes for brackets. Best done before fit-out, since it needs interior access to secure the brackets. If interior access isn’t available, nut serts can be used instead — just make sure they’re properly sealed to prevent leaks.
Click to enlarge
Step 3 — Configure your floor decking
The platform’s two T-slot rails let you lay out decking exactly how you need it. Dimensions vary by model:
| Model | A (H1L1) | A (H2L1) | A (H2L2) | B (width) |
|---|---|---|---|---|
| Sprinter High Roof | — | 3130mm | 4165mm | 1370mm |
| Sprinter Short Roof | 3543mm | — | — | 1548mm |
Decking is fully modular. Combine the Main Decking Plate with End, Side and Edge Connector plates to leave clean gaps around roof vents, and add Solar Brackets wherever you need them — see the Accessories tab for the full decking range.
Awnings
The rack is compatible with Fiamma and Thule awning systems.
- Long Wheelbase vans: we recommend the Fiamma F45s 450
- Medium Wheelbase vans: we recommend the Fiamma F45s 350
Shop Fiamma F45s 450 Awning Shop Fiamma F45s 350 Awning
Light bars
Mount a light bar using clamps designed for 40mm-diameter tubing — Stedi clamps are a good fit. Our STEDI Vice Tube Clamps also come in larger sizes if you're mounting to a thicker bar.
Shop Stedi Light Bar Shop Stedi Tube Clamps (35-40mm)
Roof Decking Range
The Main Decking Plate gives you a spacious, stable platform for walking, sitting, or securely mounting your gear. Pair it with our connector decking plates — purpose-built to sit around roof vents — and you can create a clean gap wherever you need one, without cutting or compromising the platform.
The full range:
- End Decking Plate
- Edge Side Connector Decking Plate
- Side Connector Decking Plate
- Main Decking Plate
- Solar Brackets
Click to enlarge
The image above shows an example decking configuration.
End Decking Plate Edge Side Connector Decking Plate Side Connector Decking Plate Main Decking Plate Solar Panel Brackets Pair
Safari Roof Rack - Mercedes Sprinter 907-VS30
Safari Roof Racks for serious touring.
About the Safari Roof Rack
The Weldbeat Safari Roof Rack is built for serious touring. Designed specifically for the Mercedes Sprinter 907, it delivers a lightweight yet extremely strong platform for mounting accessories, solar panels, storage boxes, recovery gear, and more.
Constructed from TIG-welded aluminium, the rack features an integrated T-slot modular system, so you can configure your layout exactly how you need it — awnings, light bars, Maxtrax, or custom mounts all bolt straight on.
Engineered to sit cleanly with the Sprinter’s body lines, it provides a low-profile, aerodynamic solution without compromising strength or usable space.
Made in Australia
All our products are proudly made in Australia, ensuring premium quality and durability.
Installation
Recommended fitment is to OEM roof rails.
Jayco Sprinter owners: the factory Fiamma awning and brackets interfere with fitment and must be removed. An alternative Fiamma awning setup is required — see the Accessories tab for our recommendation.
Carrier Specification
- TIG-welded aluminium construction
- T-slot modular channel system for attaching various decking members
- Lightweight design
- Powder-coated textured black finish
- Online installation manual included
- Recommended Fiamma F45s 450 (Long Wheel Base) or F45s 350 (Medium Wheel Base)
- Ships in 3 boxes
Step 1 — Choose the right rack for your Sprinter
Your Safari Roof Rack needs to match your van’s roof height and wheelbase:
- Fits both Standard/Short Roof (H1) and High Roof (H2) Sprinter models
- High Roof is available in Medium Wheelbase (L1) and Long Wheelbase (L2)
- Short Roof is only available in Medium Wheelbase (L1)
Click to enlarge
Step 2 — Choose your mounting method
OEM Mercedes roof rails (recommended): bolts on without needing interior access. If you’re also planning a side ladder or pole system, having the OEM rails in place makes that install easier down the track.
Direct-to-roof brackets: mounts using the existing roof holes for brackets. Best done before fit-out, since it needs interior access to secure the brackets. If interior access isn’t available, nut serts can be used instead — just make sure they’re properly sealed to prevent leaks.
Click to enlarge
Step 3 — Configure your floor decking
The platform’s two T-slot rails let you lay out decking exactly how you need it. Dimensions vary by model:
| Model | A (H1L1) | A (H2L1) | A (H2L2) | B (width) |
|---|---|---|---|---|
| Sprinter High Roof | — | 3130mm | 4165mm | 1370mm |
| Sprinter Short Roof | 3543mm | — | — | 1548mm |
Decking is fully modular. Combine the Main Decking Plate with End, Side and Edge Connector plates to leave clean gaps around roof vents, and add Solar Brackets wherever you need them — see the Accessories tab for the full decking range.
Awnings
The rack is compatible with Fiamma and Thule awning systems.
- Long Wheelbase vans: we recommend the Fiamma F45s 450
- Medium Wheelbase vans: we recommend the Fiamma F45s 350
Shop Fiamma F45s 450 Awning Shop Fiamma F45s 350 Awning
Light bars
Mount a light bar using clamps designed for 40mm-diameter tubing — Stedi clamps are a good fit. Our STEDI Vice Tube Clamps also come in larger sizes if you're mounting to a thicker bar.
Shop Stedi Light Bar Shop Stedi Tube Clamps (35-40mm)
Roof Decking Range
The Main Decking Plate gives you a spacious, stable platform for walking, sitting, or securely mounting your gear. Pair it with our connector decking plates — purpose-built to sit around roof vents — and you can create a clean gap wherever you need one, without cutting or compromising the platform.
The full range:
- End Decking Plate
- Edge Side Connector Decking Plate
- Side Connector Decking Plate
- Main Decking Plate
- Solar Brackets
Click to enlarge
The image above shows an example decking configuration.
End Decking Plate Edge Side Connector Decking Plate Side Connector Decking Plate Main Decking Plate Solar Panel Brackets Pair
Safari Roof Rack - Mercedes Sprinter 907-VS30
Safari Roof Racks for serious touring.
About the Safari Roof Rack
The Weldbeat Safari Roof Rack is built for serious touring. Designed specifically for the Mercedes Sprinter 907, it delivers a lightweight yet extremely strong platform for mounting accessories, solar panels, storage boxes, recovery gear, and more.
Constructed from TIG-welded aluminium, the rack features an integrated T-slot modular system, so you can configure your layout exactly how you need it — awnings, light bars, Maxtrax, or custom mounts all bolt straight on.
Engineered to sit cleanly with the Sprinter’s body lines, it provides a low-profile, aerodynamic solution without compromising strength or usable space.
Made in Australia
All our products are proudly made in Australia, ensuring premium quality and durability.
Installation
Recommended fitment is to OEM roof rails.
Jayco Sprinter owners: the factory Fiamma awning and brackets interfere with fitment and must be removed. An alternative Fiamma awning setup is required — see the Accessories tab for our recommendation.
Carrier Specification
- TIG-welded aluminium construction
- T-slot modular channel system for attaching various decking members
- Lightweight design
- Powder-coated textured black finish
- Online installation manual included
- Recommended Fiamma F45s 450 (Long Wheel Base) or F45s 350 (Medium Wheel Base)
- Ships in 3 boxes
Step 1 — Choose the right rack for your Sprinter
Your Safari Roof Rack needs to match your van’s roof height and wheelbase:
- Fits both Standard/Short Roof (H1) and High Roof (H2) Sprinter models
- High Roof is available in Medium Wheelbase (L1) and Long Wheelbase (L2)
- Short Roof is only available in Medium Wheelbase (L1)
Click to enlarge
Step 2 — Choose your mounting method
OEM Mercedes roof rails (recommended): bolts on without needing interior access. If you’re also planning a side ladder or pole system, having the OEM rails in place makes that install easier down the track.
Direct-to-roof brackets: mounts using the existing roof holes for brackets. Best done before fit-out, since it needs interior access to secure the brackets. If interior access isn’t available, nut serts can be used instead — just make sure they’re properly sealed to prevent leaks.
Click to enlarge
Step 3 — Configure your floor decking
The platform’s two T-slot rails let you lay out decking exactly how you need it. Dimensions vary by model:
| Model | A (H1L1) | A (H2L1) | A (H2L2) | B (width) |
|---|---|---|---|---|
| Sprinter High Roof | — | 3130mm | 4165mm | 1370mm |
| Sprinter Short Roof | 3543mm | — | — | 1548mm |
Decking is fully modular. Combine the Main Decking Plate with End, Side and Edge Connector plates to leave clean gaps around roof vents, and add Solar Brackets wherever you need them — see the Accessories tab for the full decking range.
Awnings
The rack is compatible with Fiamma and Thule awning systems.
- Long Wheelbase vans: we recommend the Fiamma F45s 450
- Medium Wheelbase vans: we recommend the Fiamma F45s 350
Shop Fiamma F45s 450 Awning Shop Fiamma F45s 350 Awning
Light bars
Mount a light bar using clamps designed for 40mm-diameter tubing — Stedi clamps are a good fit. Our STEDI Vice Tube Clamps also come in larger sizes if you're mounting to a thicker bar.
Shop Stedi Light Bar Shop Stedi Tube Clamps (35-40mm)
Roof Decking Range
The Main Decking Plate gives you a spacious, stable platform for walking, sitting, or securely mounting your gear. Pair it with our connector decking plates — purpose-built to sit around roof vents — and you can create a clean gap wherever you need one, without cutting or compromising the platform.
The full range:
- End Decking Plate
- Edge Side Connector Decking Plate
- Side Connector Decking Plate
- Main Decking Plate
- Solar Brackets
Click to enlarge
The image above shows an example decking configuration.
End Decking Plate Edge Side Connector Decking Plate Side Connector Decking Plate Main Decking Plate Solar Panel Brackets Pair
Safari Roof Rack - Mercedes Sprinter 907-VS30
Safari Roof Racks for serious touring.
About the Safari Roof Rack
The Weldbeat Safari Roof Rack is built for serious touring. Designed specifically for the Mercedes Sprinter 907, it delivers a lightweight yet extremely strong platform for mounting accessories, solar panels, storage boxes, recovery gear, and more.
Constructed from TIG-welded aluminium, the rack features an integrated T-slot modular system, so you can configure your layout exactly how you need it — awnings, light bars, Maxtrax, or custom mounts all bolt straight on.
Engineered to sit cleanly with the Sprinter’s body lines, it provides a low-profile, aerodynamic solution without compromising strength or usable space.
Made in Australia
All our products are proudly made in Australia, ensuring premium quality and durability.
Installation
Recommended fitment is to OEM roof rails.
Jayco Sprinter owners: the factory Fiamma awning and brackets interfere with fitment and must be removed. An alternative Fiamma awning setup is required — see the Accessories tab for our recommendation.
Carrier Specification
- TIG-welded aluminium construction
- T-slot modular channel system for attaching various decking members
- Lightweight design
- Powder-coated textured black finish
- Online installation manual included
- Recommended Fiamma F45s 450 (Long Wheel Base) or F45s 350 (Medium Wheel Base)
- Ships in 3 boxes
Step 1 — Choose the right rack for your Sprinter
Your Safari Roof Rack needs to match your van’s roof height and wheelbase:
- Fits both Standard/Short Roof (H1) and High Roof (H2) Sprinter models
- High Roof is available in Medium Wheelbase (L1) and Long Wheelbase (L2)
- Short Roof is only available in Medium Wheelbase (L1)
Click to enlarge
Step 2 — Choose your mounting method
OEM Mercedes roof rails (recommended): bolts on without needing interior access. If you’re also planning a side ladder or pole system, having the OEM rails in place makes that install easier down the track.
Direct-to-roof brackets: mounts using the existing roof holes for brackets. Best done before fit-out, since it needs interior access to secure the brackets. If interior access isn’t available, nut serts can be used instead — just make sure they’re properly sealed to prevent leaks.
Click to enlarge
Step 3 — Configure your floor decking
The platform’s two T-slot rails let you lay out decking exactly how you need it. Dimensions vary by model:
| Model | A (H1L1) | A (H2L1) | A (H2L2) | B (width) |
|---|---|---|---|---|
| Sprinter High Roof | — | 3130mm | 4165mm | 1370mm |
| Sprinter Short Roof | 3543mm | — | — | 1548mm |
Decking is fully modular. Combine the Main Decking Plate with End, Side and Edge Connector plates to leave clean gaps around roof vents, and add Solar Brackets wherever you need them — see the Accessories tab for the full decking range.
Awnings
The rack is compatible with Fiamma and Thule awning systems.
- Long Wheelbase vans: we recommend the Fiamma F45s 450
- Medium Wheelbase vans: we recommend the Fiamma F45s 350
Shop Fiamma F45s 450 Awning Shop Fiamma F45s 350 Awning
Light bars
Mount a light bar using clamps designed for 40mm-diameter tubing — Stedi clamps are a good fit. Our STEDI Vice Tube Clamps also come in larger sizes if you're mounting to a thicker bar.
Shop Stedi Light Bar Shop Stedi Tube Clamps (35-40mm)
Roof Decking Range
The Main Decking Plate gives you a spacious, stable platform for walking, sitting, or securely mounting your gear. Pair it with our connector decking plates — purpose-built to sit around roof vents — and you can create a clean gap wherever you need one, without cutting or compromising the platform.
The full range:
- End Decking Plate
- Edge Side Connector Decking Plate
- Side Connector Decking Plate
- Main Decking Plate
- Solar Brackets
Click to enlarge
The image above shows an example decking configuration.
End Decking Plate Edge Side Connector Decking Plate Side Connector Decking Plate Main Decking Plate Solar Panel Brackets Pair
Product Availability and Description
When our product stock levels are low, or current stock is allocated to orders, our website may show an 'in-stock' status when in fact the item might be sold out. We will advise within 48hrs; stock availability, order status and shipping details. If your order is urgent please first contact the store by email orders@kombilife.com.au or telephone SYDNEY 02 9239 4100 or GOLD COAST 07 5607 3040 to confirm product availability.
Though we endeavour to have product information as current as possible, product descriptions are sourced from the suppliers website which is constantly being updated and therefore we may have superseded information published. Should you have any questions regarding the detail we've provided please contact KombiLife using the Text Us button on the website.
Pricing & Shipping Disclaimer
Pricing Disclaimer
All prices on this web site are subject to change without notice. Whilst we make every effort to provide you the most accurate, up-to-date information, occasionally, one or more items on our web site may be mis-priced or mis-described. In the event a product is listed at an incorrect price due to typographical, photographic, or technical error or error in pricing information received from our suppliers, KombiLife Australia shall have the right to refuse or cancel any orders placed for a product listed at the incorrect price. If an item's correct price is lower than our stated price, we will charge the lower amount and ship you the item. If an item's correct price is higher than our stated price, we will cancel your order and notify you of the price error and order cancellation. You will, of course, have an opportunity to purchase the item at the correct price, if you so wish. For further information on this, please contact our friendly KombiLife team on 02 9239 4100 or email us at kombi@kombilife.com.au
Shipping Disclaimer
Sometimes the incorrect shipping value is calculated when you place an order online. When this occurs a staff member will call or email you and notify you of the accurate shipping quote in which the difference will need to be settled. You will be given the option to cancel the order if you wish.
Returns and Refund Policy
You can return an item within 14 days from the date of despatch of your order. Items must be complete, undamaged and in resaleable condition, with all original packaging, tags and documents.
Refunds, store credit and exchanges
No refunds after 14 days (store credit or exchange only, at our discretion). Items over $1000 are eligible for store credit or exchange only. A 15% restocking fee applies to change-of-mind returns, to returns made after 14 days and where any packaging or documents are missing. Deposits are non-refundable. Sale and clearance items are non-refundable.
Returns are processed within 7 business days of receipt. Refunds or store credit (as applicable, less any restocking fee) are issued within 14 days of receipt of the returned item.
All returns must be authorised first - please contact orders@kombilife.com.au before sending anything back. Faulty, damaged or incorrect items: please notify us within 3 business days of delivery. Your rights under the Australian Consumer Law are not affected.
Shipping Information
SHIPPING
We ship across Australia and New Zealand. All shipments are trackable and you will receive a tracking number upon despatch.
Australia Post and Express Parcel Post - for smaller items and deliveries to PO Boxes.
Direct Freight Express - for small items and bulky items, including pallets.
FedEx / TNT - for lithium batteries and international orders.
Our shipments are fully insured against loss and damage, ensuring that you will not be at loss should the parcel go missing.
Note all shipments will require a signature upon delivery. A package that has been signed for cannot be declared as lost, so it is important that you specify your correct delivery address or that of a trustworthy 3rd party if you elect to deliver it to an alternative business address for example.
Our pallet shipments may be sent to the depot nearest you for collection, as pallet delivery services are not available in all areas.
PICKUP
Pickup is available from both KombiLife locations. We accept credit card, bank transfer and cash on pickup.
Sydney (Campbelltown)
3/11 Mill Road, Campbelltown NSW 2560
View on Google Maps
Mon-Thu 8am to 4pm
Fri 8am to 12:30pm
Phone: 02 9239 4100
Gold Coast (Burleigh Heads)
2 Kimberley Road, Burleigh Heads QLD 4220
View on Google Maps
Mon-Fri 8am to 4pm
Phone: 07 5607 3040
Please have your name and order # handy when you arrive so we can match your items to the right person.