SEIKEL Offroad Kits

Description This Seikel engine guard is a 5mm aluminium skid plate (bash plate or sump guard) for the VW T5, T6 and T6.1 Transporter, Multivan and ...

Description Raises body by approx. 30 mm The shock absorbers are especially adjusted to the heightened chassis Includes all fitting parts The lif...

Description This Seikel fuel tank guard is a 5mm aluminium skid plate that gives underbody protection to the fuel tank on the VW T6.1 Transporter, ...

Description To prevent transmission damage due to passages through water, the vents for gearbox, transfer case and differentials on the front and...

Description This Seikel muffler guard (exhaust guard) is a 5mm aluminium skid plate that gives underbody protection to the muffler and silencer on ...

Description This Seikel diff guard (diff plate) is a 5mm aluminium rear differential skid plate for 4Motion VW T5, T6 and T6.1 Transporter and Mult...

VW Crafter 2017-on VW CRAFTER 4MOTION 2017+ Aluminium Guard four-wheel coupling/gearbox This Seikel Haldex guard is a 5mm aluminium skid plate and...

Description This Seikel shock absorber guard is a 3mm stainless steel stone deflector and skid plate that protects the rear shock absorbers on 4Mo...

Description For Volkswagen T6 / T6.1 4MOTION models with 3.2 t GVW ex work Lift kit to raise body by approx. 30 mm including comfort rear axle spr...

Description Seikel Art Nr 1561 0000 - Snorkel for VW Crafter and TGE (MY17+) Mounting the snorkel higher on the vehicle reduces the amount of dust...

Description This Seikel muffler guard (exhaust guard) is a 5mm aluminium skid plate that gives underbody protection to the muffler and silencer on ...

Description This Seikel fuel tank guard is a 5mm aluminium skid plate that gives underbody protection to the fuel tank and AdBlue tank on the VW T5...

Description Seikel Art Nr 1461 0008 This Seikel rock slider set (side sill protection bars) suits the VW Crafter and MAN TGE with the 3,640mm med...

Description This Seikel diff guard (diff plate) is a 5mm aluminium rear differential skid plate for 4Motion VW T5, T6 and T6.1 Transporter and Mult...

Description This Seikel Desert Plus kit combines a 5mm aluminium engine guard (sump guard or bash plate) with an AdBlue tank guard for the VW Craft...

Description Mounting the snorkel higher on the vehicle reduces the amount of dust in the air intake system and the intake air is cooler. It also ...

Description Mounting the snorkel higher on the vehicle reduces the amount of dust in the air intake system and the intake air is cooler. It also ...

Cast, primed and painted right-side rear axle swing arm for 16" wheel fitment, without press-fitted rubber/metal bearings, giving more space for la...

Cast, primed and painted left-side rear axle swing arm for 16" wheel fitment, without press-fitted rubber/metal bearings, giving more space for lar...

Cast, primed and painted right-side rear axle swing arm for 16" wheel fitment, with press-fitted rubber/metal bearings, giving more space for large...

Seikel 5mm solid aluminium engine guard (skid plate, sump guard or bash plate) shielding the front underbody area to prevent damage to the oil pan,...

Comprehensive steering column repair kit, newly manufactured on precision machines from tempered steel based on original VW T1 parts. Arrives pre-a...

Cast, primed and painted left-side rear axle swing arm for 16" wheel fitment, with press-fitted rubber/metal bearings, giving more space for larger...

Body lift of approx. 30mm for front-wheel-drive Volkswagen Transporter T4 models. Includes German approval certificate and all mounting parts.

Manufacturer special-offer bundle combining the "Desert" 5mm aluminium engine guard (skid plate or bash plate) and the Rockslider pair of rock slid...

Tailboard damper preventing the tailgate from dropping rapidly and reducing hinge wear by lowering slowly to the end stop. Includes all fitting par...

Seikel 5mm aluminium gearbox guard (transmission skid plate) safeguarding the transmission housing against stone-chip and impact damage. Includes a...

Seikel rock sliders: a 6mm aluminium side-sill protection profile (pair) sliding over rocky ground without damaging the body. Volkswagen Certificat...

Raised polyethylene snorkel reducing dust intake and providing cooler intake air plus water protection during deep-water fording. Requires replacem...

Seikel 5mm aluminium engine guard (skid plate, sump guard or bash plate) guarding the engine, front differential housing and lower wishbone pivot p...

Replacement bolts and nuts kit containing all fasteners that Volkswagen specifies must be renewed when fitting the Field & Forest or Desert lif...

Twin-tube KONI shock absorber lift kit for the Amarok V6, raising chassis clearance by approx. 25mm front and rear, with pre-assembled front struts...

Relocates the gearbox, transfer case and differential vents to the engine bay next to the battery, preventing gearbox damage during water crossings...

Raised polyethylene snorkel reducing dust intake and providing cooler intake air plus water protection during deep-water fording. Requires replacem...

Seikel 5mm aluminium transfer case guard (transfer box skid plate) guarding the transfer box housing against stone-chip damage. Not suitable as a j...

Relocates the gearbox, transfer case and differential vents to the engine bay next to the battery, preventing gearbox damage during water crossings...

Tailboard damper preventing the tailgate from dropping rapidly and reducing hinge wear by lowering slowly to the end stop. Includes all fitting par...

Relocates the gearbox, transfer case and differential vents to the engine bay next to the battery, preventing gearbox damage during water crossings...

Seikel 5mm aluminium gearbox guard (transmission skid plate) guarding the gearbox housing against underbody impact damage. Not suitable as a jackin...

Lift kit for the 4-cylinder Amarok (2011-2022) raising the body approx. 25mm: front axle special springs, rear 25mm spacer with leaf spring bracket...

Seikel rock sliders with side step (side sill protection): a double-tube Rockslider (3-tube steel guard rail with struts, 2.5mm wall thickness, bla...

Steel stone-chip guard that clips onto the Rockslider or Rockslider Plus rock sliders (side sill protection), preventing stones from becoming wedge...

Twin-tube KONI shock absorber lift kit for the 4-cylinder Amarok, raising chassis clearance by approx. 25mm front and rear, with pre-assembled fron...

Seikel rock sliders (side sill protection): a 2-tube steel guard rail with struts (2.5mm wall thickness, black matte powder coat) protecting the si...

Seikel 5mm aluminium engine guard (skid plate, sump guard or bash plate) safeguarding the engine, front differential housing and lower wishbone piv...

Seikel 5mm aluminium fuel tank guard (fuel tank skid plate) guarding the fuel tank from underbody impact damage. Not suitable as a jacking point. N...