Rear Bench Seat Covers for VW Multivan T5 T6 T6.1 and VW California T6.1
Estimate Shipping
Seat Cover for Rear Bench Seat for VW Multivan T5/T6/T6.1 and VW California T6.1
Available in Canvas in Black or Grey and 4Elements in Black.
Our heavy-duty canvas and 4Elements seat covers are made in Australia using Australian-made materials developed specifically for the harsh Australian climate. With manufacturing facilities in WA.
Please note these are manufactured to order so have an approx. leadtime of 4 weeks
4Elements
4Elements by Black Duck® SeatCovers is tested to withstand tough conditions without compromising on comfort. Featuring a 19.2oz Cotton Twill Composite, this is a heavyweight product with a soft and flexible feel for the ultimate in seat protection.
Made from a 100% waterproof material that is also machine washable to keep your vehicle seats in pristine condition – you won’t be disappointed!
Features
- 19.2 oz Cotton Twill Composite
- Hard Wearing Protection
- 100% Waterproof Material
- Soft and Flexible
- Washable
- UV Resistant
- Tailored Fit for Comfort and Style
- Air-bag Compatible
- Exclusive to Black Duck
- Available in Black
Heavy-duty Canvas
Heavy-duty Canvas by Black Duck® SeatCovers has undergone rigorous testing to ensure it meets stringent Australian Standards for strength and endurance.
Our Canvas is treated using advanced technologies to ensure resistance to water, rot and mildew - for vehicles that work and play hard!
Features
- 14.9oz Military Grade Canvas
- Heavy-Duty Protection
- 24+ Hour Water Resistance
- Rot and Mildew Resistant
- UV Resistant
- Tailored Fit for Comfort and Style
- Air-bag Compatible
- Available in our standard colours Grey, Black
Care and Cleaning:
- Gentle, cold machine wash (<30C)
- Lay flat to dry
- Ensure the seat covers are fully dry before placing on vehicle seats
- DO NOT tumble dry
- DO NOT dry clean
- DO NOT use detergent
- DO NOT use bleach
- DO NOT iron
Fitting Instructions:
Our seat covers go through a rigorous design process to ensure they not only offer a tailored fit to your specific seat design, but they are also designed to be as simple as possible to fit.
To start
We recommend unpacking each seat separately to avoid mixing up the driver, passenger and rear seat parts. Remove the covers from the packaging and lay them out to check that you have all the correct parts.
You should have:
- Seat base
- Backrest (sometimes base and back are attached)
- Headrest
- Armrest (if applicable)
- Each piece is identified on the inside with a white label. On the Driver and Passenger seat label, there will be a ‘DR’ to indicate Driver and a ‘PA’ to indicate Passenger. If you have seat fitted air-bags, the teal AIRBAG label will go on the outside/window side of the seat
- Vacuum your original seats and remove anything from the seat pockets.
Fitting the seat base:
- Slide the cover over the seat base, ensuring it is clear from any levers and buttons, line up the seams of the cover to the seams of the seat and massage into place
- Once the cover is in line with the seams of the seat, push the centre flap through the seat base until you can see it pop out the back of your seat. (In some models you may need to detach the carpet on the back of your seat to allow access)
- Pull the side flaps around and attach to the centre flap. Check to make sure none of the seat's levers and buttons is obstructed
- If included in the seat cover design, pull straps under the seat, clearing all tracks and fittings. Pull tight and fasten to the opposite side – test movement of seat to ensure nothing is obstructed
- Seat base fitting complete
Fitting the backrest:
- Remove headrest (if applicable)
- Slide cover over the top (like a jumper), make sure the back of the cover does not catch in the pocket on the back
- Line up the seams of the cover to the seams of the seat and massage into place
- Push the flap through the base of the seat, just like you did with the base
- Pull through tight and attach to the back of the seat
- Slide the headrest cover over the headrest with the label on the front and secure the flaps. This is designed to be a tight fit so make sure you have the seams lined up
- Replace the headrest.
- Backrest fitting complete
Repeat this process for the passenger seat and rear seats.
Once you have had your covers for a couple of weeks, we advise that you re-tension them as they will mould to the shape of your seat over time. This will leave you with the best fit possible.
**WARNING**
Only Black Duck® SeatCovers that are labelled as being Air-bag compatible are to be fitted to vehicles with seat fitted air-bags. Black Duck® SeatCovers must not be fitted to seats containing side-impact air-bag components unless they are the correct seat covers with the appropriate certification. Black Duck® SeatCovers accepts no responsibility or liability if this warning is not adhered to.
Seat Cover for Rear Bench Seat for VW Multivan T5/T6/T6.1 and VW California T6.1
Available in Canvas in Black or Grey and 4Elements in Black.
Our heavy-duty canvas and 4Elements seat covers are made in Australia using Australian-made materials developed specifically for the harsh Australian climate. With manufacturing facilities in WA.
Please note these are manufactured to order so have an approx. leadtime of 4 weeks
4Elements
4Elements by Black Duck® SeatCovers is tested to withstand tough conditions without compromising on comfort. Featuring a 19.2oz Cotton Twill Composite, this is a heavyweight product with a soft and flexible feel for the ultimate in seat protection.
Made from a 100% waterproof material that is also machine washable to keep your vehicle seats in pristine condition – you won’t be disappointed!
Features
- 19.2 oz Cotton Twill Composite
- Hard Wearing Protection
- 100% Waterproof Material
- Soft and Flexible
- Washable
- UV Resistant
- Tailored Fit for Comfort and Style
- Air-bag Compatible
- Exclusive to Black Duck
- Available in Black
Heavy-duty Canvas
Heavy-duty Canvas by Black Duck® SeatCovers has undergone rigorous testing to ensure it meets stringent Australian Standards for strength and endurance.
Our Canvas is treated using advanced technologies to ensure resistance to water, rot and mildew - for vehicles that work and play hard!
Features
- 14.9oz Military Grade Canvas
- Heavy-Duty Protection
- 24+ Hour Water Resistance
- Rot and Mildew Resistant
- UV Resistant
- Tailored Fit for Comfort and Style
- Air-bag Compatible
- Available in our standard colours Grey, Black
Care and Cleaning:
- Gentle, cold machine wash (<30C)
- Lay flat to dry
- Ensure the seat covers are fully dry before placing on vehicle seats
- DO NOT tumble dry
- DO NOT dry clean
- DO NOT use detergent
- DO NOT use bleach
- DO NOT iron
Fitting Instructions:
Our seat covers go through a rigorous design process to ensure they not only offer a tailored fit to your specific seat design, but they are also designed to be as simple as possible to fit.
To start
We recommend unpacking each seat separately to avoid mixing up the driver, passenger and rear seat parts. Remove the covers from the packaging and lay them out to check that you have all the correct parts.
You should have:
- Seat base
- Backrest (sometimes base and back are attached)
- Headrest
- Armrest (if applicable)
- Each piece is identified on the inside with a white label. On the Driver and Passenger seat label, there will be a ‘DR’ to indicate Driver and a ‘PA’ to indicate Passenger. If you have seat fitted air-bags, the teal AIRBAG label will go on the outside/window side of the seat
- Vacuum your original seats and remove anything from the seat pockets.
Fitting the seat base:
- Slide the cover over the seat base, ensuring it is clear from any levers and buttons, line up the seams of the cover to the seams of the seat and massage into place
- Once the cover is in line with the seams of the seat, push the centre flap through the seat base until you can see it pop out the back of your seat. (In some models you may need to detach the carpet on the back of your seat to allow access)
- Pull the side flaps around and attach to the centre flap. Check to make sure none of the seat's levers and buttons is obstructed
- If included in the seat cover design, pull straps under the seat, clearing all tracks and fittings. Pull tight and fasten to the opposite side – test movement of seat to ensure nothing is obstructed
- Seat base fitting complete
Fitting the backrest:
- Remove headrest (if applicable)
- Slide cover over the top (like a jumper), make sure the back of the cover does not catch in the pocket on the back
- Line up the seams of the cover to the seams of the seat and massage into place
- Push the flap through the base of the seat, just like you did with the base
- Pull through tight and attach to the back of the seat
- Slide the headrest cover over the headrest with the label on the front and secure the flaps. This is designed to be a tight fit so make sure you have the seams lined up
- Replace the headrest.
- Backrest fitting complete
Repeat this process for the passenger seat and rear seats.
Once you have had your covers for a couple of weeks, we advise that you re-tension them as they will mould to the shape of your seat over time. This will leave you with the best fit possible.
**WARNING**
Only Black Duck® SeatCovers that are labelled as being Air-bag compatible are to be fitted to vehicles with seat fitted air-bags. Black Duck® SeatCovers must not be fitted to seats containing side-impact air-bag components unless they are the correct seat covers with the appropriate certification. Black Duck® SeatCovers accepts no responsibility or liability if this warning is not adhered to.
Seat Cover for Rear Bench Seat for VW Multivan T5/T6/T6.1 and VW California T6.1
Available in Canvas in Black or Grey and 4Elements in Black.
Our heavy-duty canvas and 4Elements seat covers are made in Australia using Australian-made materials developed specifically for the harsh Australian climate. With manufacturing facilities in WA.
Please note these are manufactured to order so have an approx. leadtime of 4 weeks
4Elements
4Elements by Black Duck® SeatCovers is tested to withstand tough conditions without compromising on comfort. Featuring a 19.2oz Cotton Twill Composite, this is a heavyweight product with a soft and flexible feel for the ultimate in seat protection.
Made from a 100% waterproof material that is also machine washable to keep your vehicle seats in pristine condition – you won’t be disappointed!
Features
- 19.2 oz Cotton Twill Composite
- Hard Wearing Protection
- 100% Waterproof Material
- Soft and Flexible
- Washable
- UV Resistant
- Tailored Fit for Comfort and Style
- Air-bag Compatible
- Exclusive to Black Duck
- Available in Black
Heavy-duty Canvas
Heavy-duty Canvas by Black Duck® SeatCovers has undergone rigorous testing to ensure it meets stringent Australian Standards for strength and endurance.
Our Canvas is treated using advanced technologies to ensure resistance to water, rot and mildew - for vehicles that work and play hard!
Features
- 14.9oz Military Grade Canvas
- Heavy-Duty Protection
- 24+ Hour Water Resistance
- Rot and Mildew Resistant
- UV Resistant
- Tailored Fit for Comfort and Style
- Air-bag Compatible
- Available in our standard colours Grey, Black
Care and Cleaning:
- Gentle, cold machine wash (<30C)
- Lay flat to dry
- Ensure the seat covers are fully dry before placing on vehicle seats
- DO NOT tumble dry
- DO NOT dry clean
- DO NOT use detergent
- DO NOT use bleach
- DO NOT iron
Fitting Instructions:
Our seat covers go through a rigorous design process to ensure they not only offer a tailored fit to your specific seat design, but they are also designed to be as simple as possible to fit.
To start
We recommend unpacking each seat separately to avoid mixing up the driver, passenger and rear seat parts. Remove the covers from the packaging and lay them out to check that you have all the correct parts.
You should have:
- Seat base
- Backrest (sometimes base and back are attached)
- Headrest
- Armrest (if applicable)
- Each piece is identified on the inside with a white label. On the Driver and Passenger seat label, there will be a ‘DR’ to indicate Driver and a ‘PA’ to indicate Passenger. If you have seat fitted air-bags, the teal AIRBAG label will go on the outside/window side of the seat
- Vacuum your original seats and remove anything from the seat pockets.
Fitting the seat base:
- Slide the cover over the seat base, ensuring it is clear from any levers and buttons, line up the seams of the cover to the seams of the seat and massage into place
- Once the cover is in line with the seams of the seat, push the centre flap through the seat base until you can see it pop out the back of your seat. (In some models you may need to detach the carpet on the back of your seat to allow access)
- Pull the side flaps around and attach to the centre flap. Check to make sure none of the seat's levers and buttons is obstructed
- If included in the seat cover design, pull straps under the seat, clearing all tracks and fittings. Pull tight and fasten to the opposite side – test movement of seat to ensure nothing is obstructed
- Seat base fitting complete
Fitting the backrest:
- Remove headrest (if applicable)
- Slide cover over the top (like a jumper), make sure the back of the cover does not catch in the pocket on the back
- Line up the seams of the cover to the seams of the seat and massage into place
- Push the flap through the base of the seat, just like you did with the base
- Pull through tight and attach to the back of the seat
- Slide the headrest cover over the headrest with the label on the front and secure the flaps. This is designed to be a tight fit so make sure you have the seams lined up
- Replace the headrest.
- Backrest fitting complete
Repeat this process for the passenger seat and rear seats.
Once you have had your covers for a couple of weeks, we advise that you re-tension them as they will mould to the shape of your seat over time. This will leave you with the best fit possible.
**WARNING**
Only Black Duck® SeatCovers that are labelled as being Air-bag compatible are to be fitted to vehicles with seat fitted air-bags. Black Duck® SeatCovers must not be fitted to seats containing side-impact air-bag components unless they are the correct seat covers with the appropriate certification. Black Duck® SeatCovers accepts no responsibility or liability if this warning is not adhered to.
Product Availability and Description
When our product stock levels are low, or current stock is allocated to orders, our website may show an 'in-stock' status when in fact the item might be sold out. We will advise within 48hrs; stock availability, order status and shipping details. If your order is urgent please first contact the store by email orders@kombilife.com.au or telephone SYDNEY 02 9239 4100 or GOLD COAST 07 5607 3040 to confirm product availability.
Though we endeavour to have product information as current as possible, product descriptions are sourced from the suppliers website which is constantly being updated and therefore we may have superseded information published. Should you have any questions regarding the detail we've provided please contact KombiLife using the Text Us button on the website.
Pricing & Shipping Disclaimer
Pricing Disclaimer
All prices on this web site are subject to change without notice. Whilst we make every effort to provide you the most accurate, up-to-date information, occasionally, one or more items on our web site may be mis-priced or mis-described. In the event a product is listed at an incorrect price due to typographical, photographic, or technical error or error in pricing information received from our suppliers, KombiLife Australia shall have the right to refuse or cancel any orders placed for a product listed at the incorrect price. If an item's correct price is lower than our stated price, we will charge the lower amount and ship you the item. If an item's correct price is higher than our stated price, we will cancel your order and notify you of the price error and order cancellation. You will, of course, have an opportunity to purchase the item at the correct price, if you so wish. For further information on this, please contact our friendly KombiLife team on 02 9239 4100 or email us at kombi@kombilife.com.au
Shipping Disclaimer
Sometimes the incorrect shipping value is calculated when you place an order online. When this occurs a staff member will call or email you and notify you of the accurate shipping quote in which the difference will need to be settled. You will be given the option to cancel the order if you wish.
Returns and Refund Policy
You can return an item within 14 days from the date of despatch of your order. Items must be complete, undamaged and in resaleable condition, with all original packaging, tags and documents.
Refunds, store credit and exchanges
No refunds after 14 days (store credit or exchange only, at our discretion). Items over $1000 are eligible for store credit or exchange only. A 15% restocking fee applies to change-of-mind returns, to returns made after 14 days and where any packaging or documents are missing. Deposits are non-refundable. Sale and clearance items are non-refundable.
Returns are processed within 7 business days of receipt. Refunds or store credit (as applicable, less any restocking fee) are issued within 14 days of receipt of the returned item.
All returns must be authorised first - please contact orders@kombilife.com.au before sending anything back. Faulty, damaged or incorrect items: please notify us within 3 business days of delivery. Your rights under the Australian Consumer Law are not affected.
Shipping Information
SHIPPING
We ship across Australia and New Zealand. All shipments are trackable and you will receive a tracking number upon despatch.
Australia Post and Express Parcel Post - for smaller items and deliveries to PO Boxes.
Direct Freight Express - for small items and bulky items, including pallets.
FedEx / TNT - for lithium batteries and international orders.
Our shipments are fully insured against loss and damage, ensuring that you will not be at loss should the parcel go missing.
Note all shipments will require a signature upon delivery. A package that has been signed for cannot be declared as lost, so it is important that you specify your correct delivery address or that of a trustworthy 3rd party if you elect to deliver it to an alternative business address for example.
Our pallet shipments may be sent to the depot nearest you for collection, as pallet delivery services are not available in all areas.
PICKUP
Pickup is available from both KombiLife locations. We accept credit card, bank transfer and cash on pickup.
Sydney (Campbelltown)
3/11 Mill Road, Campbelltown NSW 2560
View on Google Maps
Mon-Thu 8am to 4pm
Fri 8am to 12:30pm
Phone: 02 9239 4100
Gold Coast (Burleigh Heads)
2 Kimberley Road, Burleigh Heads QLD 4220
View on Google Maps
Mon-Fri 8am to 4pm
Phone: 07 5607 3040
Please have your name and order # handy when you arrive so we can match your items to the right person.